COMPLETE ECO-FRIENDLY CLEANING & RESTORING SOLUTIONS FOR HOME AND AWAY.

Marine Wash Applications Instructions
Mix 1/2 cup Marine Wash per gallon in a bucket and dissolve. Let it perculate for 15 minutes, and it is ready to apply.

Fiberglass decks Using a stiff deck brush, dip the brush into the solution and proceed to scrub the deck. Rinse with water

Teak Again, using a deck brush, wet the teak with the solution and scrub. Rinse with water.

Sail covers, awnings, spray dodgers Spray onto fabric with either a spray bottle or pump style sprayer, or simply wet from the bucket, scrub with brush, especially areas of dirt or mold, and garden hose off. Let dry and repeat if you have stubborn spots.

Deck cushions Spray on the solution, wipe down with a sponge, cloth or brush, and hose off.

Bait tanks Pour the bucket of solution into the bait tank, scrub with a brush, then drain and rinse.

Fridge or icebox Spray interior to disinfect the surfaces and de stroy any odour causing bacteria. If the fridge or icebox has a drain, the solution will help keep the drain hose free of organic deposits that may slow the draining process.

Countertops, sink etc. Rather than using chemically toxic disinfectants, spraying the surfaces with Marine Wash will clean and disinfect, allowing the boat or RV own er to dispense with multiple cleaners

Headliner Simply spray and wipe down with the marine wash solution for removal of any mildew stains
that cause those musty smells.

Under cushion cleaning A regular spray and wipe with Marine Wash will prevent any mold and mildew growth, keeping the sleeping areas smelling fresh and clean.

Interior cushions or carpets Spray stains with a spray bottle (32 oz spray bottle needs only 2 tablespoons of powder). Do not mix in the bottle and cap as the release of the oxygen gases will blow the top off. Instead mix in an open top container, let perc then pour into the sprayer. After wetting the stains with the product, let sit for 10 minutes or so, keeping it wet, then blot with a rag, sponge or paper towel and let it dry. If a white powder remains after drying, simply vacuum it off or remove with a damp cloth.

Head Run the normal amount of water into the head. Pour a capful of the powder directly into the bowl, stir to dissolve…a common toilet brush works well. The anti-bacterial feature of the Marine Wash will ensure no odour remains in the bowl or on the brush. After letting it sit for about 15 minutes, flush into the holding tank and rinse with water. The action of the solution, as it flows through the hoses to the tank will also help remove and prevent organ ic build up along the hose walls, keeping them clean, odour free and freely flowing.

Holding tank The oxidizing action of the Marine Wash will keep the effluent from coating the tank walls, dramatically reduce any smell, and help keep the contents loose for more efficient and complete pump out.

We made our Marine and RV Wash very low foaming and it has a pleasant citrus scent, thus when cleaning it does not raise any flags due to excess amounts of foam or chemical odors surrounding the boat which is always a major concern for marinas and yacht clubs.

Space is always a concern on a boat and that’s why we made this product in a super concentrated powder with each 850 g bottle making 8 gallons of cleaner. Buying our boat cleaner in powder form, rather than a boat cleaner in liquid form, has a couple of key advantages. The first is no expiration date as powder does not expire. The second advantage is that when the powder is mixed with water you are getting a cleaning product at 100% full strength. When you buy any cleaning product that is mixed in liquid form, it contains anywhere from 70-98% water and every single day that the product sits, it weakens until it is useless or expires.