COMPLETE ECO-FRIENDLY CLEANING & RESTORING SOLUTIONS FOR HOME AND AWAY.

ALL WOOD WASH

Use as a cleaner or as a preparation for staining or sealing wood. Works on Mahogany, Teak, Pine, Cedar, Fir, or pressure treated wood. Great on decks, fences, docks, lawn furniture, siding, wood shingles and shakes.

Not advised for Redwood.

This hydrogen peroxide-based formulation with natural wood brighteners continues to receive compliment after compliment. The alternative has always been chlorine bleach or TSP but the problem with those cleaners is that they leave the wood surface with a very unnatural bleached look, and rarely comes out uniformly clean, with a “blotchy” look that looks as if a bucket of bleach was thrown on the house.

Our Oxy All Wood Wash does not contain bleach nor does it require bleach to be added. Oxy All Wood Wash comes in a powdered form that when mixed with water creates millions of tiny little bubbles. These bubbles loosen all mold and fungus that may be attached to the wood surfaces. Our advantage is the natural adhesive, that we added, to keep the product on vertical or steep pitched surfaces long enough to clean before running off. A light brushing with a scrub brush and a hose powered rinse is all that is needed to clean up your cedar shakes or shingle and save them from rotting away.

Pressure washing cedar shakes or shingles or decking planks without prior treatment can actually make your situation worse. Direct pressure can embed mold spores into the wood and if you are applying a stain or sealant the mold will quickly come back through. High-pressure power washing is not advised as when the pressure hits the surface, it only spreads the mold around the whole area, but damages the wood surface if the mold is treated first with Oxy All Wood Wash, then pressure washed very lightly, (1000 psi or less), the cleaning process is accelerated, and will not spread the mold nor damage or scar the wood and immediately brings the wood back to its original beauty.

Add 125 ml of Oxy All Wood Wash (1/2 cup or 3 capfuls per gallon) to 4 L of water. If available, warm water dissolves best. Mix well, stirring frequently, then allow the solution to fully activate for 15 minutes before use. Clean in small enough sections that can be kept wet. Apply the solution with a garden style hand pump sprayer, scrub with a stiff deck brush, then rinse with fresh water and move onto the next
section. Note that if the wood is painted or previously stained and the coating is in poor shape, Oxy All Wood Wash may lift worn spots. If in doubt, it is always good to test in an inconspicuous spot.

Avoid letting overspray dry on glass as it leaves a difficult to clean residue.

Active ingredient: hydrogen peroxide

850 g will clean 600 –900 sq. ft.

4.5 kg will clean 3000 –4000 sq. ft.

18 kg will clean 12,000 –16,000 sq. ft.